Best RV Class A Customs Products

Bestseller No. 1
Class A Customs 14" RV Roof Vent 12 Volt Powered Fan w/White Wedge Lid - 5" Garnish Ring | 71112A-5G
  • Standard Universal RV Roof Vent (12 volt POWERED FAN) w/ White Wedge Style Lid Heng's Industries Part # 71112A
  • 12 VOLT Powered Fan Push Button On/Off - MANUAL CRANK HANDLE to open lid - MESH SCREEN
  • ROUGH CUT-OUT OPENING DIMENSIONS (this is the hole you will need in your roof) 14 1/2” X 14 1/2
Bestseller No. 2
Class A Customs RV Landing Gear Leg Only | Follow Leg | Idle Leg | 5th Wheel | Toy Hauler | Camper | Lippert/Venture |
  • Kit includes landing gear follow / idle leg and snap pin
  • Easy to install and designed for long life
  • Can be used with most landing gear sets, including Atwood, Venture, and Lippert models, LCI power landing gear assemblies
Bestseller No. 3
Class A Customs | One (1) RV Fresh and Gray Water 30 Gallon Tank | T-3000
  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
  • WATER TANK MEASUREMENTS: 34.5” Longest Length (not including fittings) x 12” x 17.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement)
  • TANK BUILT-IN TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed
Bestseller No. 4
Class A Customs 38 Gallon RV Waste Black Water Holding Tank WT-3800
  • 38 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping.
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur.
Bestseller No. 5
Class A Customs | RV Fresh and Gray Water Tank | Combo Pack (16 Gallon & 21 Gallon) | RV Water Holding Tanks
  • Combo Pack of RV Fresh & Gray Water Tanks, 16 Gallon & 21 Gallon
  • NSF Certified MATERIALS used for manufacturing process -- ALL PARTS of tank made with NSF International NSF/ANSI Std 61 approved Medium Density Polyethylene (MDPE) Resin with UV-8 stabilization -- The tank and fittings are both made out of this material.
  • These 16 and 21 gallon tanks each have two 1/2" female NPT fittings (fitting will be closed, to use remove inner membrane with razor knife) and two 1 1/2" female NPT fittings (fitting is not closed, this fitting is completely open)
Bestseller No. 6
Class A Customs | T-2500 | One (1) RV Fresh Water 25 Gallon Tank, Grey Water
  • 25 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
  • WATER TANK MEASUREMENTS: 33 1/2" Longest Length (not including fittings) x 10" x 17" - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement)
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
Bestseller No. 7
Class A Customs | RV Fresh and Gray Water Tank | Combo Pack (21 Gallon & 25 Gallon) | RV Water Holding Tanks
  • Combo Pack of RV Fresh & Gray Water Tanks, 21 Gallon & 25 Gallon
  • NSF Certified MATERIALS used for manufacturing process -- ALL PARTS of tank made with NSF International NSF/ANSI Std 61 approved Medium Density Polyethylene (MDPE) Resin with UV-8 stabilization -- The tank and fittings are both made out of this material.
  • These 21 and 25 gallontanks each have two 1/2" female NPT fittings (fitting will be closed, to use remove inner membrane with razor knife) and two 1 1/2" female NPT fittings (fitting is not closed, this fitting is completely open)
Bestseller No. 8
Class A Customs 1 Set (2pcs) of RV Trailer Camper Post Jacks w/Crank Handle
  • This listing is for (2) Post Jacks
  • Swing / fold down
  • 1,000 pound capacity
Bestseller No. 9
Class A Customs | 2 Pack | 27.5" Black Metal Table Leg, with 2 Black Surface Mount Plastic Bases (2 Black Legs, 4 Black Surface Mount Bases)
  • Two (2 Total) RV Table Legs - Straight Non-folding - Black Poweder Coated with Plastic Bases
  • RV Table Legs - these are not for use as bed legs or supports, bases will not support weight.
  • Includes 2 bases per leg - Plastic Surface Mount Base - does not require drilling a hole in floor to install - Outer Diameter 6.5"
Bestseller No. 10
Class A Customs | RV Fresh and Gray Water Tank | Combo Pack (30 Gallon & 40 Gallon) | RV Water Holding Tanks
  • Combo Pack (ONE) 30 Gallon & (ONE) 40 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
  • 30 and 40 GALLON EACH TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
Bestseller No. 11
Class A Customs 14" Non-Powered RV Roof Vent with White Wedge Style Lid 3" Garnish Ring and Plastic Crank Handle | 71111A-3G
  • Standard Universal RV Roof Vent (NON POWERED) w/ White Wedge Style Lid Heng's Industries Part # 71111A
  • ROUGH CUT-OUT OPENING DIMENSIONS (this is the hole you will need in your roof) 14 1/2” X 14 1/2
  • MANUAL CRANK HANDLE to open lid - MESH SCREEN
Bestseller No. 12
Bestseller No. 13
Class A Customs | UM-2000 | One (1) UnderMount 20 Gallon RV Fresh and Gray Water Holding Tank RV Concession
  • 20 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
  • WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” height x 13” width - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement)
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings
Bestseller No. 14
Class A Customs | 27.5" Black Metal Table Leg, with 2 Black Surface Mount Plastic Bases (1 Black Leg, 2 Black Surface Mount Bases)
  • One (1 Total) RV Table Legs - Straight Non-folding - Black Poweder Coated with Plastic Bases
  • RV Table Legs - these are not for use as bed legs or supports, bases will not support weight.
  • Includes 2 bases per leg - Plastic Surface Mount Base - does not require drilling a hole in floor to install - Outer Diameter 6.5"
Bestseller No. 15
Bestseller No. 16
Class A Customs | Under Mount 20 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit UM-2000-BPK
  • 20 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
  • WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 13” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement)
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
Bestseller No. 17
Class A Customs | RV ATV Cycle Truck Cargo Work Trailer Side Air Vents | Two Pack | Black | High Tech/Arrow Design
  • New High-Tech Arrow Shaped Plastic Side Wall Air Vents for cargo trailer ventilation
  • MATERIAL: Plastic COLOR: Black QUANTITY: 2 Vents Total
  • MEASUREMENTS ARROW PIECE 8.5” Widest point x 7.8125” Tallest point MEASUREMENTS INNER CIRCLE PIECE 3” diameter insert x 4.125” face plate
Bestseller No. 18
Class A Customs 48 Gallon RV Waste Black Water Holding Tank 56 x 30 x 9 WT-4800
  • 48 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping.
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur.
Bestseller No. 19
Class A Customs | T-2100 | One (1) RV Fresh Water 21 Gallon Tank, Grey Water
  • 21 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
  • WATER TANK MEASUREMENTS: 34” Longest Length (not including fittings) x 9” x 16” ” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement)
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
Bestseller No. 20
Class A Customs | Four (4) Pack of Black Locking Fold Down Camper Latch and Catch
  • Locking camper latches insure your pop up camper or snowmobile trailer is secure
  • Constructed of steel, powder coated black for corrosion resistance
  • Mounting plate measures 2" x 1 7/8" - Catch measures 1 1/4" x 7/8"

Last update on 2022-08-11 / Affiliate links / Images from Amazon Product Advertising API